Authors CurseForge

Quote from Chmee »

The actual link on the download page is http://www.mobmap.de/dodownload.php?dl=database/MobMapDatabaseEnglish.zip&mirror=1 which I suppose would work correctly if I could figure out the right regexp(s). Too tired now. I'll take another look later.

Change "AddonExtension regexp" to

<a href="dodownload.php\?dl=database\/%(fname)s\.(.+?)\&mirror=1"

Here it is. Thanks in advance for your help.

filion, jnci:

Bingo! fixes worked like a charm! Thanks!

Okay, I finally managed to get WUU to grab Mobmap. The setup regexps are different to what's in the picture on WUUWiki. Here's a shot of that window after I got it to work:

Well, okay, it didn't show up in the message body, but it's here. Feel free to use it for the WUU wiki.

UPDATE: It's still basically having the same problem, but I discovered that if I try to update manually, the addons from WoWAce will check version and update correctly. But all the others - Auctioneer, CTMod, Cosmos, Curse, GoogleCode and WoWI - still have the same problem of hanging. And, as before, there's no indication in the log that I even attempt an update/version check unless it's with WoWAce.

Hm. The whole deal with mobmap for me was that using the suggested regexps from the wiki page did not work for me. Or at least, didn't seem to. It's possible I entered them wrong, and my efforts to get it right caused more problems. IIRC, I made some other changes besides just "name" to "fname" - which I did because I couldn't find anything that told me what "name" referenced, and did not know it's the same as fname.

Couple of Mac version interface bugs:

The pageup, pagedown, home, and end buttons should cause the window (the list of addons) to scroll. Often, they do nothing. Fooling around with cursor focus (hovering over or clicking in the window, or the scroll bar) will cause them to work, but then when I page down (or whatever) the window does not refresh (the listing area goes blank).

Shrinking the window to be smaller than the default size causes the scroll bar and/or the four buttons at the bottom of the list to disappear.

Hi, I have also had the problem with the app starting and crashing immediately on OS X 10.4.11. Here is my crash log:
Date/Time: 2007-11-19 11:27:46.116 -0600
OS Version: 10.4.11 (Build 8S165)
Report Version: 4

Command: WUU
Path: /Applications/WUU.app/Contents/MacOS/WUU
Parent: WindowServer [65]

Version: 1.6.477 (1.6.477)

PID: 349
Thread: 0

Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000000

Thread 0 Crashed:
0 libSystem.B.dylib 0x9012cab0 _malloc_initialize + 1016
1 libSystem.B.dylib 0x900163e8 malloc_default_zone + 44
2 libobjc.A.dylib 0x90a3ca30 _objc_internal_zone + 108
3 libobjc.A.dylib 0x90a3c980 _objc_init_class_hash + 48
4 libobjc.A.dylib 0x90a3c030 map_images + 96
5 dyld 0x8fe0f5bc ImageLoaderMachO::doNotification(dyld_image_mode, unsigned, dyld_image_info const*) + 108
6 dyld 0x8fe035c4 dyld::notifyAdding(std::vector<ImageLoader*, std::allocator<ImageLoader*> >&) + 260
7 dyld 0x8fe0dc4c ImageLoader::link(ImageLoader::LinkContext const&, ImageLoader::BindingLaziness, ImageLoader::InitializerRunning, unsigned) + 324
8 dyld 0x8fe04070 dyld::link(ImageLoader*, ImageLoader::BindingLaziness, ImageLoader::InitializerRunning) + 380
9 dyld 0x8fe089cc addImage(void*, char const*, bool, bool, bool, bool) + 180
10 libSystem.B.dylib 0x9004b710 NSAddImage + 96
11 info.vagabonds.wuu 0x000067b4 main + 76
12 info.vagabonds.wuu 0x000018a4 start + 68

Thread 0 crashed with PPC Thread State 64:
srr0: 0x000000009012cab0 srr1: 0x100000000000d030 vrsave: 0x0000000000000000
cr: 0x42000004 xer: 0x0000000000000000 lr: 0x000000009012c6ec ctr: 0x0000000090003168
r0: 0x0000000000000002 r1: 0x00000000bffff7c0 r2: 0x0000000042000002 r3: 0x0000000000008004
r4: 0x00000000a0010260 r5: 0x00000000000091cc r6: 0x0000000000000001 r7: 0x0000000000009030
r8: 0x0000000000000000 r9: 0x0000000000009208 r10: 0x00000000900014f0 r11: 0x00000000a0006154
r12: 0x0000000090003168 r13: 0x0000000000000024 r14: 0x000000006f014cfe r15: 0x0000000000000024
r16: 0x000000006f015492 r17: 0x0000000000000000 r18: 0x0000000000000000 r19: 0x0000000000000000
r20: 0x0000000000000000 r21: 0x0000000000000001 r22: 0x00000000bffffaa0 r23: 0x00000000bffffb48
r24: 0x000000009fffc6c0 r25: 0x0000000000000006 r26: 0x0000000000000006 r27: 0x0000000000000000
r28: 0x0000000000000001 r29: 0x00000000a000c6c0 r30: 0x0000000000000000 r31: 0x000000009012c6c0

Binary Images Description:
0x1000 - 0x7fff info.vagabonds.wuu 1.6.477 /Applications/WUU.app/Contents/MacOS/WUU
0x8fe00000 - 0x8fe52fff dyld 46.16 /usr/lib/dyld
0x90000000 - 0x901bcfff libSystem.B.dylib /usr/lib/libSystem.B.dylib
0x90214000 - 0x90219fff libmathCommon.A.dylib /usr/lib/system/libmathCommon.A.dylib
0x907bb000 - 0x90894fff com.apple.CoreFoundation 6.4.8 (368.31) /System/Library/Frameworks/CoreFoundation.framework/CoreFoundation
0x908df000 - 0x909e1fff libicucore.A.dylib /usr/lib/libicucore.A.dylib
0x90a3b000 - 0x90abffff libobjc.A.dylib /usr/lib/libobjc.A.dylib
0x90b71000 - 0x90b83fff libauto.dylib /usr/lib/libauto.dylib
0x91433000 - 0x9143efff libgcc_s.1.dylib /usr/lib/libgcc_s.1.dylib

This happened with the last two versions. I have been able to successfully run the two most recent verions WUU using Python in the terminal. When I tried to make my own app, I got error messages and it wouldn't run.

I tried going back to the .445 version and it ran and updated like a charm. So now I have a running .477. So I suggest downloading the .445 version and letting it update for OS X users. I also apologize for uploading some bad data to the database. I am old and it took me a while to figure out the settings.

Quote from lejordet »

I tried this, and I found that I could use the settings you had above, but after that I had to set the [Related] folder Auc-Advanced (which is the real main folder) to the following:
AddonDirectory: Auc-Advanced
Friendly Name: Auc-Advanced
Source Site: Auctioneer
SiteID: AuctioneerAdvancedSuite

Finally I deleted the old AuctioneerAdvancedSuite addon (which will delete all related, too), and re-updated Auc-Advanced.

This worked great! Thanks!

Is there a similar "trick" to get GathererDB_Wowhead working? I've tried a few things, but I can't get WUU to manage this AddOn.

jnci,

No worries. I wasn't offended, just trying to be clear. :-)

Thanks for the good work!

Quote from Jncl »

Hi kyleki,

Try using the settings in the attached picture, it worked for me :)

Thanks! That gave me enough info to figure it out, although I had to use some slightly different values. See the attached image. The truncated value is:

http://media.gathereraddon.com/dl/GathererDB/%(name)s%(ver)s.%(ext)s

(since the dialog isn't resizable) :(

I can't figure out how to sort the list of addons in the client on Linux. Running in WindowsXP, I get a little arrow icon in the column header showing what is being sorted on. In Linux, this icon is never shown.

I've tried double-clicking and right-clicking the column headers, but nothing happens.

Here's what I'm running from:
WUU 1.6.477
Fedora 8
Python 2.5.1
wxPython 2.8.4

BTW, the link at the top of wuu.vagabonds.info into this forum should link to this thread rather than the one for the old version as it does now.

Thanks,
Kyle

Quote from kyleki »

Thanks! That gave me enough info to figure it out, although I had to use some slightly different values. See the attached image. The truncated value is:

http://media.gathereraddon.com/dl/GathererDB/%(name)s%(ver)s.%(ext)s

(since the dialog isn't resizable) :(

The dialog is going to be completely reworked for 1.7/1.8 :) I've added resizing to the "old one", but I'm not sure how much it helps - it'll be in the final 1.6 release (later today, I hope)

Quote from kyleki »

I can't figure out how to sort the list of addons in the client on Linux. Running in WindowsXP, I get a little arrow icon in the column header showing what is being sorted on. In Linux, this icon is never shown.

I've tried double-clicking and right-clicking the column headers, but nothing happens.

Here's what I'm running from:
WUU 1.6.477
Fedora 8
Python 2.5.1
wxPython 2.8.4

BTW, the link at the top of wuu.vagabonds.info into this forum should link to this thread rather than the one for the old version as it does now.

Thanks,
Kyle

I have a server with Fedora 8, so I'm going to test this after work today (and also fix the link), but I can't promise it'll be fixed for 1.6.

WUU 1.6.483 win32
WUU 1.6.483 osx
WUU 1.6.483 source/linux

MD5 sums:

49d0df9141eaa8408cc3c292e96cc0d8 *WUU-1.6.483.zip
e08ecd5f14b55a9ed9bb2ff940681707 *WUU-1.6.483.dmg
d031654dec8afb79bc5b9258d1d9018c *WUU-1.6.483-src.zip

1.6.483 (final version) (2007.11.21):

* Added better error handling to self-updater
* Made Edit dialog resizable (due to missing sizer, the controls inside don't follow the new size correctly - this will be fixed in 1.7)
* Bugfix: PageUp/PageDown sometimes did nothing
* Added preference to activate Debug messages to the log & trace files
* Bugfix: Invalid version number error
* Sitefix: Better GoogleCode handling
* Bugfix #1833163: WUU on themed systems sometimes has invisible text (forced black on white text, for now - will make it configurable later)