• 0

    posted a message on ClosetGnome - Wear it or lose it.
    Quote from deluXE »

    ClosetGnome has problems when it has to deal with two identical items. Form my Nature resistance gear I'm wearing two Hearts of Noxxion (trinkets), and even if correctly shown in the set window, the addon will switch in only one of them. Same goes for the bank plugin that retrieves and stores only one of the trinkets.
    Can it be fixed?

    Rabbit, enjoy your holidays!


    Was searching through the forums and this was the only post I found dealing with this problem... I apologize if it has been discussed elsewhere... is there anyway to fix this?
    Posted in: General AddOns
  • 0

    posted a message on WowAceUpdater 1.9.44+ Official Thread
    Quote from Tekko »

    I had the same issue as well. This is what I did to fix it:

    Deleted the wowace folder in: C:\Documents and Settings\%username%\Local Settings\Application Data

    Deleted the wowace folder in C:\Documents and Settings\%username%\Local Settings\Temp

    Did the IE install from http://www.wowace.com/wau/publish.htm

    Everything is back to normal for me.


    Confirmed that this works!
    Posted in: Updaters
  • 0

    posted a message on WowAceUpdater 1.9.44+ Official Thread
    Quote from Murazorz »

    And me, first I thought it was the firewall I had just installed. I disabled it, didn't work, I ultimately uninstalled it, but it still doesn't work.

    I don't see any of my addons, I also get the "Ready... (Data is not cached old)" as well, and there are no files in the C:\Documents and Settings\***\Local Settings\Application Data\Temp\WowAceUpdater folder. The built-in XP firewall accepts WAU, I've reset my WinSOCK key. Reloading the index doesn't work, and the "auto-try of addon list load" obviously doesn't work either.


    I did all these things as well with the same result
    Posted in: Updaters
  • 0

    posted a message on ArcHUD 2.2 (2007-06-11)
    Anyway to setup combo points as dots on the bars?
    Posted in: General AddOns
  • 0

    posted a message on Omen - Bug Reports and Suggestions
    Quote from Mal »

    Quote from DGambler »

    I know Omen can read KTM data, but are there any plans for it to expose threat #'s back to KTM? I've tried getting my guild converted over to Omen, but they have refused. Currently, I'm stuck with KTM because I'm a tank and they want to see my #'s as well... help, please, KTM is a hog and I really really don't want to run it anymore.

    Sorry if this has been addressed elsewhere, I've searched and couldn't find an answer.


    http://www.wowace.com/forums/index.php?topic=6768.0


    Thanks, I think I need to L2Search better.
    Posted in: Raid AddOns
  • 0

    posted a message on Omen - Bug Reports and Suggestions
    I know Omen can read KTM data, but are there any plans for it to expose threat #'s back to KTM? I've tried getting my guild converted over to Omen, but they have refused. Currently, I'm stuck with KTM because I'm a tank and they want to see my #'s as well... help, please, KTM is a hog and I really really don't want to run it anymore.

    Sorry if this has been addressed elsewhere, I've searched and couldn't find an answer.
    Posted in: Raid AddOns
  • 0

    posted a message on [Old] PitBull - official topic
    Any update on incorporating "DruidBar" like functionality?
    Posted in: Unit Frames
  • 0

    posted a message on [Old] PitBull - official topic
    Ok, loving Pitbull. Just one request, could you pull in functionality from DruidBar to replicate that functionality? Would love to have it native in this add-on.
    Posted in: Unit Frames
  • 0

    posted a message on Aloft - Customized Nameplates - Official Thread
    Any way to only show nameplates of guild members?
    Posted in: General AddOns
  • 0

    posted a message on Baggins_ClosetGnome/Baggins_ItemRack/Baggins_Usable/Baggins_Professions
    Quote from Nayala »

    The first is to turn on the remove duplicates in the baggins menu (I think it's off the Item submenu, not in game right now). That option causes items to only appear once in any bag/section. The first section that matches is where items are displayed. If you followed the steps above exactly "EquipSets" should be before your other equipment and so this should just work for you.

    If you want to set items duplicated in other sections but want to just exclude your item sets from the Armor and Weapons Categories, you can do the following: ((Again, I'm doing this from memory, so the syntax might no be exactly right.))
    In the baggins menu choose "Edit Categories", expand the "Armor" category by clicking on the "+" next to it. Click on "Add Rule" to add a rule to that category. Set the rule type to ItemRack or ClosetGnome and the set to you wish to exclude. "Any" is a good choice. Finally the "Operation" should be set to "Not". Do the same for the "Weapons" Category, then "Apply" and "Close" the categories window.


    Thanks, the 1st option works for now... I'll play around with the 2nd option later as it looks to give more control!
    Posted in: General AddOns
  • 0

    posted a message on Baggins_ClosetGnome/Baggins_ItemRack/Baggins_Usable/Baggins_Professions
    Ok, I followed the below and it works perfectly... just one issue. My ClosetGnome items are showing up under "EquipSets" and "Armor" in my bag... any way to make a "negative" condition to remove CG items out of Armor?

    Quote from Nayala »

    • Baggins_ClosetGnome
    • Both these plugins allow filtering of sets within Baggins.

      Here's an example of how to add filters based on these addons. They work like any other Baggin filter. Note you will need a recent version of Baggins to use these plugins.
      • Create a category.
        • In the Baggins menu (right click on the Baggins FuBar widget) choose "Edit Categories".
        • Click on "New Category", and make a category called EquipSets.
        • Click on "Add Rule" to add a rule to that category.
        • Then right click on the rule to define the rule.
        • If you are using ItemRack, set the rule type to ItemRack, otherwise set it to ClosetGnome.
        • For ItemRack 1.991 you have access to item sets for other characters. You can use "Self" to make the rule always apply to the current character.
        • For both ClosetGnome and ItemRack you will also need to pick the set you wish the Category to match. For this example pick "Any", which will match "Any" item in any set you have defined.
        • Once you have finished this you can "Close" the Categories window.
      • Add the category to a bag
        • Back in the Baggins menu choose "Edit Bags".
        • Expand the "Equipment" bag by clicking on the "+" next to it.
        • Add a new section called EquipSets.
        • From there click add category and choose the EquipSets category you made earlier.
        • Click the "-" next to the new section to close the section
        • Shift click "EquipSets" a few times to move it to the top of the bag. By having this set at the top of your bag you can turn on hide duplicates and exclude your item sets from showing up in all other bags and sections.
        • Do the same sequence for the "Bank Equipment"

    Posted in: General AddOns
  • 0

    posted a message on [request] Metamap Notes import
    The last attached file worked for me, thanks all!
    Posted in: Map/Minimap AddOns
  • 0

    posted a message on [request] Metamap Notes import
    I'll try tonight... if, for some reason this doesn't work, then I'll just go MetaMap Notes ==> MapNotes ==> Cartographer... oh what fun that will be :)
    Posted in: Map/Minimap AddOns
  • 0

    posted a message on Bartender3 - Action Bar AddOn for WoW 2.0
    Love BT3... long time user and I've gotten most of my guild hooked on it... woot for Ace goodness.

    Just one question, on a couple of quests in Outland, you get "possessed" or change into something else... for instance Teron Gorefiend, I am...... it gives you a new pet bar... as a Druid, with the Shapeshifting bar up, it bugs out and I can't control the new "pet", I worked around it by unloading BT3 and using standard bars for that specific quest, but just wanted to let you know.

    Edit: I realized I didn't ask a question... is there something I should setup differently to work around this if I run into another quest like this?
    Posted in: General AddOns
  • 0

    posted a message on [request] Metamap Notes import
    I made the modifications to the files as instructed above and it looks like upon login, it it pulling in the notes, but I think it isn't mapping the icons correctly as none of them are showing up (the notes).

    Looks like it is just picking up Old World notes and Outland "gathering" items from MetaMap.
    Posted in: Map/Minimap AddOns
  • To post a comment, please or register a new account.